Business Jet 2018 Tour

This tour is finished.

Please log in to send a report.

Banniere tour business 2

Enter in the highest spheres of business aviation ! Travel in 32 legs to the most exclusive airfields ! At the end of this tour, you will get the division Business Jet Tour Award.

Opening date and time

01/06/2018 00:05 UTC

Closing date and time

31/05/2019 23:55 UTC

Total distance

20851 NM


  • This tour must be done with one of the planes listed in the document
  • Business turboprop are allowed for the shorter legs
  • All legs must be carried out on IVAO network with real weather.
  • All legs have to be flown in the right order.
  • Be carefull, some legs could be optional.
  • Flights must be performed in real time (sim rate x1 only - sim rate above x1 is strictly forbidden).
  • IAS 250kts below FL100 must be respected.
  • Members not communicating intentions on Unicom 122.800, or crashing into other traffic, can be excluded from participation.
  • Completed flights must be reported after each leg by using flight report so that to be validated.
  • Please report any contacted ATC in your flight report
  • You must disconnect after each completed leg.
  • Please pay attention to your flight plans :
    • Flight plans with wrong departure/arrival airfields will NOT be accepted.
    • Pay attention of your plane's equipments, they must be compatible with your plane.
    • Pay attention to indicate "PBN" in your FPL (RMK/18) if your aircraft is RNAV equipped.
  • A direct flight will be accepted with authorization from the controller only, legs report form must be reported.
  • To be connected a minimum of 5 minutes before take off and stay connected a minimum of 5 minutes after landing, for the correct record tracker.
  • Every pilot having completed all legs in accordance with the required conditions will be awarded.
  • For each step, a route is proposed and validated IFPS at the time of its establishment. This is only a suggestion : you can create your own route !

List of legs

1. LFPB - LFMD376 NM- Details
2. LFMD - EGKB545 NM- Details
3. EGKB - LFMN545 NM- Details
4. LFMN - LFBH388 NM- Details
5. LFBH - LSGG303 NM- Details
6. LSGG - LFBE250 NM- Details
7. LFBE - LFLP244 NM- Details
8. LFLP - EDDM274 NM- Details
9. EDDM - LFMV391 NM- Details
10. LFMV - LFRD403 NM- Details
11. LFRD - UUWW1490 NM- Details
12. UUWW - LFPM1328 NM- Details
13. LFPM - LFBP339 NM- Details
14. LFBP - LIRA583 NM- Details
15. LIRA - LFJL507 NM- Details
16. LFJL - LFOH243 NM- Details
17. LFOH - EDDS362 NM- Details
18. EDDS - LFCR379 NM- Details
19. LFCR - LFRZ260 NM- Details
20. LFRZ - LIML486 NM- Details
21. LIML - LFPN354 NM- Details
22. LFPN - LFKC467 NM- Details
23. LFKC - KTEB (optional step)3560 NM- Details
24. KTEB - LFGA (optional step)3353 NM- Details
25. LFGA - LFAT267 NM- Details
26. LFAT - LFLY317 NM- Details
27. LFLY - LKPR457 NM- Details
28. LKPR - LFRT675 NM- Details
29. LFRT - LFCK368 NM- Details
30. LFCK - EGNS688 NM- Details
31. EGNS - LFLB649 NM- Details
32. LFLB - LFPB244 NM- Details